the main rule is IF YOU DIDN'T BREAK IT YOU DIDN'T HAVE FUN !
THESE ARE THE RULES FOR THE NOLIMIT WORLDS FINALS ONLY IF YOU WISH TO PARTICIPATE IN THEM
Mission Statement - No Limit R/C's purpose is to promote fun, competitive R/C racing and pulling events in a wholesome family atmosphere.
General Event Guidelines
1. We must all remember that we not only represent No Limit R/C, but also the various hobby stores and businesses that host and sponsor the events. Therefore, senior participants of the hobby are expected to set good examples to assist the newer participants of the hobby.
2. All decisions made by the No Limit R/C Track Official will stand. Staff and participants are required to maintain self-control and good sportsmanship at all times. The use of foul language, stealing, fighting or arguing with No Limit R/C Track officials and other participants is prohibited.
3. The presence or uses of any alcoholic beverages or illegal drugs at any of our events are not permitted. Operation of nitro R/C vehicles while under the influence is dangerous. In the event that a participant is suspected to have consumed any alcoholic beverages or illegal drugs, he/she will be bared from further participation and will be dismissed from the event. Such participants will forfeit their entry fee and accumulated points. The appropriate Law Enforcement authorities will be called to assist any participants that refuse to leave the events when asked to do so under the listed circumstances.
4. Grievance Reporting: Any participant may file a grievance if a rules violation is suspected.
1. Participants must submit a written statement with explanation of grievance to a No Limit R/C Official along with a $20 non-refundable fee.
2. All grievances must be reported by the end of the event in question. NO EXCEPTIONS.
3. The vehicle owner in which the grievance has been reported against will be advised by a No Limit R/C Official that impoundment and inspection of the vehicle will be required. If disassembly is required, the owner will be requested to do so under the direction of the Official.
4. Race results will be reviewed by the No Limit R/C Track Officials. All decisions are FINAL
4X4 Nitro Small
Block Monster Truck
1. Engine - Any readily available production nitro engine with a displacement no smaller then .12 cubic inches and no larger then .20 cubic inches.
2. Truck - Traxxas Revo, T-Maxx, AE 3.0 are examples of trucks that can run in this class. No Truggies.
3. Tires - Tires are to be any readily available production tire with dimensions no smaller than 5" high x 2.5" wide. Tires may be changed during competition as long as they meet the size requirements. Buggy tires are prohibited.
4. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Direct drive truggy gearing is prohibited. Center Differentials and one way bearings are NOT permitted.
5. Weight - Small block pulling trucks shall weigh no more than 15 pounds. This rule only applies for pulling there are no weight requirements for racing.
6. Chassis - Chassis is to be any readily available production or custom Monster Truck type chassis. Flat Buggy and Truggy type chassis are prohibited.
4X4 Nitro Big Block Monster Truck & Pro/Factory 4X4 Nitro Big Block Monster Truck
1. Engine - Any readily available production nitro engine with a displacement .21 cubic inches and larger.
2. Truck - HPI Savage, Savage X, Savage XL, Losi LST1, LST2, LST XXL Aftershock, Beetle, Raminator, AE MGT are examples of trucks that can run in this class. Traxxas Revos and T-maxx's are permitted as long as they meet the motor and tire size requirements. No Truggies.
3. Tires - Tires are to be any readily available production tire with dimensions no smaller than 5" high x 3" wide. Tires may be changed during competition as long as they meet the size requirements. Buggy tires are prohibited.
4. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Truggy type Direct drive gearing is prohibited. Center Differentials, smart diffs and one way bearings are NOT permitted.
5. Weight - 4x4 Big Block pulling trucks shall weigh no more than 17.5 pounds. Unlimited 4x4 Big Block pulling trucks shall weigh 17.6 lbs and up. This rule only applies for pulling there are no weight requirements for racing.
6. Chassis - Chassis is to be any readily available production or custom Monster Truck type chassis.
7. If you are a past podium finisher 1st thru 3rd in any Racing class or you are a Pro Staff Factory driver for an RC Company you must register in the 4x4 Pro/Factory Class. This excludes the novice class.
8. 4x4 Unlimited Big Block Pulling trucks may be equipped with more than 1 big block motor, powere adders such as nitrous and super charger, ect... They must be 4 wheel drive.
4X4 Brushless Electric Monster Truck
1. Truck - HPI Savage Flux, HPI E-Savage, Traxxas E-Maxx, E- Revo, Summit, Hot Bodies E-Zilla, and Kyosho Twin Force are examples of trucks that are permitted to run in this class. Custom built 4wd Electric Monster Trucks with independent or ladder bar type suspension similar to the production trucks stated above may run in this class also. Truck must run with a body. No Truggies.
2. Tires - Tires are to be any readily available production tire with dimensions no smaller than 5" high x 2.5" wide. Tires may be changed during competition as long as they meet the size requirements. Buggy tires are prohibited.
3. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Direct drive truggy gearing is prohibited. Center Differentials and smart diffs are not permitted. One way bearings are permitted.
4. Chassis - Chassis is to be any readily available production or custom Monster Truck type chassis.
5. Motors & Batteries - Trucks must run 1 or 2 brushless motors. Trucks may use a maximum of 14 Sub C and C size NiCd or NiMH cells or up to a 3 cell LI-Ion or LiPo battery.
4X4 Pro Modified Electric Monster Truck
1. Truck - Tamiya Clod Buster, Tamiya Super Clod Buster, Tamiya TXT-1, Tamiya Juggernaut 1 & 2, G - Made Dragoon are examples of trucks that are permitted to run in this class. Custom built 4wd electric monster trucks with solid axels and 4 link type suspensions are also permitted. Independent suspension is prohibited. Truck must run with a body.
2. Wheels & Tires - Wheels are to be Clod Buster size wheels 2.6" in diameter. Tires are to be any readily available production tire with dimensions no smaller than 5" high x 3 " wide. Tires may be changed during competition as long as they meet the size requirements. Buggy, Truggy, 40 series, Savage, MGT, T- Maxx size tires and wheels and tires are prohibited.
3. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Direct drive gearing is prohibited. Center Differentials, smart diffs and one way bearings are NOT permitted.
4. Chassis - Chassis is to be any readily available production or custom 4- link suspension based Monster Truck type chassis. Tube chassis and and vertical plate type chassis are permitted.
5. Motors & Batteries - Trucks must run 2 brushed 540 can motors or 2 brushless motors. Trucks may use a maximum of 14 Sub C and C size NiCd or NiMH cells or up to a 3 cell LI-Ion or LiPo battery.
4X4 Brushed Electric Monster Truck
1. Truck - HPI E-Savage, Traxxas E-Maxx, Hot Bodies E-Zilla, and Kyosho Twin Force are examples of trucks that are permitted to run in this class. Custom built 4wd Electric Monster Trucks with independent or ladder bar type suspension similar to the production trucks stated above may run in this class also. Truck must run with a body. No Truggies.
2. Tires - Tires are to be any readily available production tire with dimensions no smaller than 5" high x 2.5" wide. Tires may be changed during competition as long as they meet the size requirements. Buggy tires are prohibited.
3. Transmission - Each truck shall be equipped with a functional gear driven transmission to propel the truck. Direct drive truggy gearing is prohibited. Center Differentials and smart diffs are not permitted. One way bearings are permitted.
4. Chassis - Chassis is to be any readily available production or custom Monster Truck type chassis. Supporting independent or ladder bar type suspension.
5. Motors & Batteries - Trucks must run 2 brushed motors with 540 or 550 cans .Trucks may use a maximum of 14 Sub C and C size NiCd or NiMH cells or up to a 3 cell LI-Ion or LiPo battery.
